PWM2LS – Isolated dual Channel Low Speed PWM to Analog Converter

$80.00 – $90.00

Low Speed Dual channel PWM (TTL) to 0-10V analog converters with optical isolation.

Features

  • PWM input range 10 to 100 Hz
  • Adjustable output level
  • Optical isolation
  • Independent inputs
  • Common ground outputs
  • Through hole components
  • Socket mounted ICs
  • Sturdy construction
  • Fits in standard DIN rail enclosure (not supplied)
SKU: A004 Categories: , , ,

Description

This board is a Low Speed variant of the PWM2B to use with low frequency pulse outputs with two frequency range options: 10-100Hz or 0.1-10Hz. and is suitable to interface very low frequency devices with PWM output, such as meteorological sensors, with other equipment requiring analogue input proportional to the duty cycle of the PWM signal.

At very low frequencies the averaging  filter used in the PWM2B presents a trade-off between ripple/response time, that may render it unsuitable for some applications. The PWM2LS uses a different approach by using a micro controller to measure the actual duty cycle of the PWM inputs and generate a high frequency PWM output that improves dramatically the ripple/response time value.

The board requires a 24Vdc power supply and delivers and output level adjustable between 5V and 12V at full scale, making it directly compatible with most commercial drives. If the output voltage is limited to 5-6 V the power supply may be as low as 10V.

Each channel input is optically isolated from the other and the controller. Both output channels share a common ground.

The board is fitted with standard 0.2″ terminal boards and can bedelivered as a bare board or housed in a commercial plastic enclosure with DIN rail mounting for easy addition to electrical control cabinets.

Specifications

  • Number of channels :2
  • PWM input:    TTL level, Standard: 10 to 100 Hz, Ultra Low: 0.1 to 10 Hz
  • Output: Adjustable 0 to 5..12V. Max 10mA
  • Linearity: 2% FSD
  • Ripple: 50 mVpp max. (10-100 Hz input)
  • Response time:  100 ms max. @ 10Hz,  25ms @ 100Hz
  • Isolation: Min. 500 Vac
  • Power: Nominal 24 Vdc  (Acceptable range 18 to 30 Vdc)
  • Dimensions:
    • Bare board 3.4 x 2.7 x 0.65 in. (87 x 69 x 16 mm)
    • Enclosed: 3.5 x 2.8 x 2.3 in ( (89 x 72 x 58 mm)
  • Weight: 2.5 oz (0.07 Kg)

 Usage

Each input channel is totally independent, therefore they can be connected to different controllers (if required). The outputs share a common ground.

Documentation

Enclosures

Enclosures for this board can be purchased through distributors or online at:

 

Additional information

Weight 0.07 kg
Dimensions 8.7 × 3.3 × 2.0 cm
FREQUENCY RANGE

10-100Hz, 0.1-10Hz
ENCLOSURE

BARE BOARD, DIN RAIL ENCLOSURE

Related products